+- AirSource Virtual Pilot Union Forums (https://forums.air-source.us)
+-- Forum: General Discussion Conferences (https://forums.air-source.us/forumdisplay.php?fid=3)
+--- Forum: General Discussions (https://forums.air-source.us/forumdisplay.php?fid=7)
+--- Thread: Wilco 737 PIC (/showthread.php?tid=1065)
Wilco 737 PIC - ianbeggs - 03-25-2009
How can I use a coroute in this bird, read the manual google it everything, is it even possible. Its for fsx. The FP I saved is in the fsx flightplan directory. But it will not load it.
- AS283 Roger Dean - 03-26-2009
Loading a route works a tad bit different in the Wilco 737,
First load the flight plan in FSX (Flights -> Flight Planner -> Load -> Select Plan -> Open -> OK)
In the CDU press "RTE" then "Route REQUEST" . You will notice that the current flight plan loaded in FSX will get loaded in the CDU. Your Origin and Dest will be populated.
Then press "ACTIVATE" and "EXEC" and you are good to continue programming the CDU.
- ianbeggs - 03-27-2009
Thanks, did what you said works great.