![]() |
SYD = KAST?? - Printable Version +- AirSource Virtual Pilot Union Forums (https://forums.air-source.us) +-- Forum: AirSource Operations (https://forums.air-source.us/forumdisplay.php?fid=5) +--- Forum: Website Error Reports (https://forums.air-source.us/forumdisplay.php?fid=30) +---- Forum: Airport Database Errors (https://forums.air-source.us/forumdisplay.php?fid=27) +---- Thread: SYD = KAST?? (/showthread.php?tid=3035) |
SYD = KAST?? - Alan Black AS122 - 03-14-2015 I seem to have a knack for finding the quirks in the system ;-) I just went to enter JST415 in the FlightKiosk and got the results below. Although it look like it detected the flight correctly initially, it ended up entering a flight from OOL-KAST? Here's the text from the kiosk so you can see the progress. Alan Flight Data Found You entered following data for flight search: Airline: JST Flight Number: 415 (JQ) Jetstar 415 OOL Coolangatta Gold Coast, QLD, AU to SYD Sydney, NSW, AU Departs: 9:45 AM Arrives: 12:15 PM Duration: 1h 30m Equipment: Airbus Industrie A320 Flight Distance: 6,311 Nautical Miles Airline IATA found in database: Jetstar Airways Pty Ltd [JST / JST] NOT CORRECT? Departure airport IATA found in database: Coolangatta [OOL / YBCG] NOT CORRECT? Arrival airport IATA found in database: Astoria Regl [AST / KAST] NOT CORRECT? NO MATCHING FLIGHT FOUND: (JQ) Jetstar 415 - added flight to database. Re: SYD = KAST?? - Buckeye Roy - 03-14-2015 Alan, Looks like what is happening is instead of the FK entering the flight data from FliightStats its showing the flight data for Flt#415 which was entered in July 2013 and is already in the Jetstar Flight Schedules. This flight has the wrong arrival airport (AST/KAST) showing. Unfortunately I could not remove the erroneous flight without removing all the flights departing OOL airport to fix it. [Tom - We need to have a single flight removal function in the Admin Section. Or, add a batch removal function done by arrival airports as well as departing airports.] Re: SYD = KAST?? - AS 2 Tom Little - 03-14-2015 Roy, No doubt I need to get that function in there soon. But I do not think that (bad flight in the database) is what is causing the issue. In fact I tried to delete that flight and then entered FK data, but the flight is still drawing up KAST as arrival. I need to look further into the code to see what is going on. Re: SYD = KAST?? - AS 2 Tom Little - 03-18-2015 Found the bug! There was an internal code problem that was causing some airport data to get corrupted in translation. |