+- AirSource Virtual Pilot Union Forums (https://forums.air-source.us)
+-- Forum: AirSource Add On Programs (https://forums.air-source.us/forumdisplay.php?fid=4)
+--- Forum: MyActive AirSource (https://forums.air-source.us/forumdisplay.php?fid=56)
+--- Thread: myaasv2 and p3d 2.5 issues (/showthread.php?tid=3087)
Pages:
1
2
myaasv2 and p3d 2.5 issues - chobson - 05-19-2015
Hi there
I have just switched over to p3d 2.5 and cant get myaas v2 to find the simulator. The latest FSUIPC is installed everything is installed correctly even tried a reinstall of FSUIPC but still it wont detect the simulator is running when it is Any ideas on this would be welcome as i am grounded till its sorted
thanks in advance
Craig
Re: myaasv2 and p3d 2.5 issues - AS201 Joe - 05-19-2015
Hi Craig-
Have you tried right clicking on myaas2 and
'Run as Administrator'?
Not p3d user myself, can you make sure fsuipc shows up in the menu bar inside of p3d (if there is one)
Re: myaasv2 and p3d 2.5 issues - chobson - 05-19-2015
Hi Joe
Yep it shows in p3d as it does in fsx and both p3d and myaas are running in admin mode.
craig
Re: myaasv2 and p3d 2.5 issues - AS201 Joe - 05-20-2015
Please try this version -> http://air-source.us/operations/myaas2/myaas2_test.zip and see if that works.
Re: myaasv2 and p3d 2.5 issues - chobson - 05-20-2015
I will download and have a look tonight when I get home thank you for the hard work Joe
Regards
Craig
Re: myaasv2 and p3d 2.5 issues - chobson - 05-20-2015
Joe,
After some playing around it works , One thing i have found is that if you want it to work in p3d v 2.5 is as the following findings
with your new test exe you MUST have a registered copy of FSUIPC to make it detect the simulator
you MUST run p3d with admin rights and the same with myaas.
reason for the capitals on the must it has to be done to make it run correctly.
Big thank you to Joe for this quick update and help keep up the good work buddy if i find anything else i will post here for you
Biggest thanks and regards
Craig
Re: myaasv2 and p3d 2.5 issues - AS201 Joe - 05-20-2015
Odd needing a registered version of FSUIPC. I'll look some more.
At least it's working now. Probably helps that I updated with the new FSUIPC code (that recognizes P3D). My bad on that.
Have to wonder, though, if anybody else uses P3D here?
Re: myaasv2 and p3d 2.5 issues - AS 2 Tom Little - 05-20-2015
Great job Joe, and yes I have to wonder just how many here use P3d? I would say run a poll, but those are usually not very successful.
Re: myaasv2 and p3d 2.5 issues - AS380 Mark Richards - 05-22-2015
Joe, there are also new offsets for FSX:SE (Steam Edition) which is another potential market for us to gain members from.
Re: myaasv2 and p3d 2.5 issues - AS201 Joe - 05-22-2015
Hi Mark,
Did they change the ones that myAAS2 currently uses or just added new ones?
I guess what I'm trying to figure out it's does myAAS2 work with it or, if it doesn't, what parts aren't?