+- AirSource Virtual Pilot Union Forums (https://forums.air-source.us)
+-- Forum: AirSource Add On Programs (https://forums.air-source.us/forumdisplay.php?fid=4)
+--- Forum: MyActive AirSource (https://forums.air-source.us/forumdisplay.php?fid=56)
+--- Thread: Error - Cannot complete flight (/showthread.php?tid=3330)
Error - Cannot complete flight - as176andre - 03-21-2016
Hi team,
I have had this error a few times now, once I have landed I try to end flight and Pirep but the selection button does not work, I end up having to go back to a previous saved version on the approach and land again, then I have the option to end and Pirep, Any Ideas, am I landing so smoothly that AAS does not recognize that I have landed?
Re: Error - Cannot complete flight - AS201 Joe - 03-21-2016
Andre-
That's a new one. Don't think we have had that problem before. Just to check, do you know if there is anything the same between the flights that don't work? Maybe, same aircraft, scenery, etc. myAAS just checks the "aircraft on ground" flag to see if the landing has taken place. Might be, for some reason, it is not getting set?
On a side note: instead of going back to a previous save, just select "Save/Continue Flight Later..." and save the flight. Back at the main screen, right-click on the flight and select "Change Flight Status to Complete...". You might not get any landing rate, not sure, but it's a little easier.
Re: Error - Cannot complete flight - as176andre - 03-22-2016
Thanks Joe, let me try that tonight, I will also monitor the flights, have now had 3 in a row with PMDG 777300. But will keep checking to see a trend, I Mostly fly PMDG aircraft.
Re: Error - Cannot complete flight - AS201 Joe - 03-23-2016
Another thought, Andre.
Double check that your FSUIPC is up to date. Some things tend to over-write it with an older version.