AirSource Virtual Pilot Union Forums
Client causing screen flicker - Printable Version

+- AirSource Virtual Pilot Union Forums (https://forums.air-source.us)
+-- Forum: AirSource Add On Programs (https://forums.air-source.us/forumdisplay.php?fid=4)
+--- Forum: MyActive AirSource (https://forums.air-source.us/forumdisplay.php?fid=56)
+--- Thread: Client causing screen flicker (/showthread.php?tid=3524)



Client causing screen flicker - bob3464 - 05-11-2017

Hi guys. I'm on a multi monitor setup.
Screen 1 - P3D
Screen 2 - MyAAS / vPilot
Screen 3 - Flight Deck Solution FMC (which is basically a small monitor @ 1280x1024 where I drag the undocked PMDG FMC onto the screen)

When the myAAS client is running, the 3rd screen is flickering or refreshing every 5 seconds or so. When I close it out - it stops. Any suggestions other than moving the client to a laptop?

Thanks,

Bob


Re: Client causing screen flicker - JSkorna - 05-12-2017

Is MyAAS on the screen visible or minimized to the system tray?


Re: Client causing screen flicker - bob3464 - 05-13-2017

JSkorna Wrote:Is MyAAS on the screen visible or minimized to the system tray?

Hi Jim. Either position, visible or minimized, any monitor, it causes the FMC to refresh the same time the client itself refreshes.
It's not the worst problem to have, but it's certainly noticeable especially in a darker room.

I also noticed when I switch over to X-Plane 11 when the primary Monitor 1 isn't active (for example when watching youtube cat videos on monitor 2 Smile ), X-Plane will flicker/refresh the same way.

I typically drag the client over to monitor #2, get it started, then minimize it.
I ran a few flights w/out AAS and also with other acars clients and I can undoubtedly say the myAAS update is related to the other monitor flickering.


Re: Client causing screen flicker - AS201 Joe - 05-14-2017

Sorry for the late reply, Bob. Been pretty busy here lately.

I'll have to do some research on this. Helps that you have nailed it down to myAAS2. I know I fought some flickering issues in the early stages. Maybe there's something else I didn't get.

Just out of curiosity, has this just recently started happening? You have quite a few flights.


Re: Client causing screen flicker - AS201 Joe - 05-24-2017

Bob,
Can you try these two versions and see if either one solves the flickering issue?

http://www.air-source.us/operations/myaas2/myaas2_uw.zip

http://www.air-source.us/operations/myaas2/myaas2_ir.zip


Re: Client causing screen flicker - bob3464 - 05-27-2017

Hi Joe. Sorry for taking so long. Just got back from a long business trip.

Both of your test versions fix the problem. I didn't test with X-Plane, but in P3D my FDS FMC does not flicker any longer.
Amazing job isolating and fixing this. Thank you so much for your attention. Have a great weekend.


Bob


AS201 Joe Wrote:Bob,
Can you try these two versions and see if either one solves the flickering issue?

http://www.air-source.us/operations/myaas2/myaas2_uw.zip

http://www.air-source.us/operations/myaas2/myaas2_ir.zip



Re: Client causing screen flicker - AS201 Joe - 05-28-2017

Not a problem on the delay (mine was 10 days) Big Grin. I figured you would get to it when able.

Glad the issue seems solved. All due to my mistake of, accidentally, refreshing the screen twice. Funny, it has been in the code since the initial release and hasn't caused any issues until now. I separated them out (hence the two versions) to test. Just need to flip a coin and decide which one to use.