03-21-2023, 05:23 AM
We're are thinking ov moving the big Husky workbench and the stainless steel table with the Ryobi tools out into the big shed. That is once we get it built. Just waiting for a warm and windless day. If it's warm, we have 20mph winds. If it's windless it's too damn cold. We're at that freaky weather part of the season here in OKC.
I'll move the resin printers over to where the big husky was. (Over to the left corner of the pic, just in view of the camera.)
We have an old bar height kitchen table on the back patio we'll probably put in the open area. Give me a nice big place to work and a place for us to sit and do some bigger projects.
We have curtains on the front across the windows. Certainly helps with temperature and gives some privacy. And we just put some up in front of the washer/dryer area to make it more aesthetic.
Unfortunately one nigh my PTSD got the best of me and I trhew something across the room and it hit the TV on the flightsim. Yup, down one 43" 4K TV. We put the TV that was going to be mounted on the ceiling on it for now. My Mother-in-Law has our old 55". The coax connector broke and they watch cable/live TV so they got a new one. I'll put that on the flightsim. Not 4K, but hey, if I want 4K I have the Valve Index 4K VR goggles. There the 4K is worth it. My eyes REALLY can't see the difference these days when watching bare TV. Besides, FS runs better at a 1920x1080 resolution vs the 2446x1440 of 4K. A noticeable increase in FPS.
It's getting there. I had a two car garage in the old place too that we converted. But this one seems bigger. I think it is just more a layout thing. This garage is a bit longer since ot has the laundry, but the same width.
Now I just need to get more outlets and breakers. I can pop the one breaker if I have all four printers going and BOTH PC's cranking away. FORGET firing up the laptop and/or the GlowForge as well, lol. Right now it's good. It'll just be an issue during the hotter parts of the summer when the portable A/C unit is NEEDED. The weather at the moment lets us turn it off for a while most days.
Once we have it complete I'll do a nice panorama picture of video walk-through.
I'll move the resin printers over to where the big husky was. (Over to the left corner of the pic, just in view of the camera.)
We have an old bar height kitchen table on the back patio we'll probably put in the open area. Give me a nice big place to work and a place for us to sit and do some bigger projects.
We have curtains on the front across the windows. Certainly helps with temperature and gives some privacy. And we just put some up in front of the washer/dryer area to make it more aesthetic.
Unfortunately one nigh my PTSD got the best of me and I trhew something across the room and it hit the TV on the flightsim. Yup, down one 43" 4K TV. We put the TV that was going to be mounted on the ceiling on it for now. My Mother-in-Law has our old 55". The coax connector broke and they watch cable/live TV so they got a new one. I'll put that on the flightsim. Not 4K, but hey, if I want 4K I have the Valve Index 4K VR goggles. There the 4K is worth it. My eyes REALLY can't see the difference these days when watching bare TV. Besides, FS runs better at a 1920x1080 resolution vs the 2446x1440 of 4K. A noticeable increase in FPS.
It's getting there. I had a two car garage in the old place too that we converted. But this one seems bigger. I think it is just more a layout thing. This garage is a bit longer since ot has the laundry, but the same width.
Now I just need to get more outlets and breakers. I can pop the one breaker if I have all four printers going and BOTH PC's cranking away. FORGET firing up the laptop and/or the GlowForge as well, lol. Right now it's good. It'll just be an issue during the hotter parts of the summer when the portable A/C unit is NEEDED. The weather at the moment lets us turn it off for a while most days.
Once we have it complete I'll do a nice panorama picture of video walk-through.
