05-04-2023, 07:10 AM
The first prototype of the "8 pack" panel.
![[Image: 8-pack-left_sm.jpg]](https://www.sonjas-hangar.us/Images/8-pack-left_sm.jpg)
Hi-Res Here
The board was designed in 3DS Max, loaded into TinkerCad to export as a Flattened SVG so it could be uploaded to the Glowforge Laser Cutter. It was cut from a small scrap of Basswood Plywood I had laying around.
The bevels were found on the 3D file site Thingiverse and printed out of Blue PETG on a Troinxy CRUX 1 printer. The prints aren't super high quality since this is just a prototype.
The bolts are just some simple machine bolts I had left over from a box of assorted bolts and nuts from Amazon.
Hi-Res Here
The board was designed in 3DS Max, loaded into TinkerCad to export as a Flattened SVG so it could be uploaded to the Glowforge Laser Cutter. It was cut from a small scrap of Basswood Plywood I had laying around.
The bevels were found on the 3D file site Thingiverse and printed out of Blue PETG on a Troinxy CRUX 1 printer. The prints aren't super high quality since this is just a prototype.
The bolts are just some simple machine bolts I had left over from a box of assorted bolts and nuts from Amazon.
