Joe,
Am using v2.0.2021. Did Air China A340 flight, ZSPD-ZUUU this a.m. MyAAS recorded the correct fuel usage of 48547 lbs, and a landing rate of -318.5 fpm at 114 kts. My timer from pushback to stop at gate was 2hr36 min. MyAAS gave the flight time as 36 minutes only! Any idea what might have happened? I won't manually file 'til you see this post.....thanks,
Terry Wright
AS86
Posts: 784
Threads: 63
Joined: Oct 2011
Reputation:
0
Hi Terry,
Not sure what happened there. I doubt your db file would tell me anything either.
Go ahead and upload the flight but, when the PIREP page comes up, close it and let it fail. Let me know when you have done this and I'll get the time set correctly.
Also...the standard time issue question...is your computer's clock showing the correct time?
Hi Joe,
I forgot to even look at my computer's clock......darn thing's off by more than 2 hours. I'll try re-seating the CMOS battery again.
Not sure what you mean about the PIREP, so I'll file it manually...save you having to adjust it.
Thanks,
Terry
Sorry, Tom....already filed manually....but thanks for clarification.
Joe....just to confirm...it was the CMOS. Once I reseated the CMOS battery, the computer time moved to the current time, and is maintaining it so far. Just did ZUUU-ZWWW (Air China A320) and MyAAS worked and filed just fine....thanks again,
Terry
Posts: 784
Threads: 63
Joined: Oct 2011
Reputation:
0
Sorry for the confusion, Terry.
I was working on catching that after the last time it happened. Had the time-keeping system all messed up and reverted back to the old code. Might have to revisit this and try again.
