• Welcome to the AirSource Forums!
  • This space intentionally filled with airspace..
  • FL290-FL410 Track 000 to 179° – odd thousands
  • FL290-FL410 Track 180 to 359° – even thousands
  • Confess, Conserve, Climb, Communicate, and Comply
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: Chose the wrong aircraft while filing Pirep
Threaded Mode
#1
Hi everyone,

While filing my Pirep for EVT11 last night, I thought I had selected the PC-12 from the drop-down menu as that is the aircraft I flew instead of the A319 that is defaulted for that crew pass.

Is it possible to have the aircraft corrected? Sorry to be a bother...

Details below:
ircraft Data
2 Engine, Jet, Large Manufacturer Airbus Industries
Aircraft Type A319
Fuel Used 602 Pounds
2 Engine, Jet, Large
Pay Data
Pay Per Hour $93.27 x Time Flown 2.5 + Flat Pay $500.00 = $733.18

Flight Remarks
**MyAAS Verified**
Active AirSource Data
[1] Ground Time Mins. Used: 12 [2] Latitude: 27.9071 [3] Longitude: -82.6903 [4] Data Saved (UTC Time): 3/30/2020 5:12:29 AM [5] Landing Rate: -116.111 [6] Simulator Aircraft: CARENADO PC12 2

 
Reply
#2
Hmmm...I've flown the next two flights in the event, EVT12 and 13, both with the PC12 and my logbook is reflecting the suggested aircraft.

Is that a function of the crew pass system vs scheduled flights? No worries if it is.

thanks!

Geoff
AS668

 
Reply
#3
Hello Geoff,

All fixed! http://air-source.us/Operations/logbook ... tid=376899

Also I made a slight change on the PIREP page, let's make sure that it works now..

 
Reply
#4
Hi Tom,

thanks very much!

I'm flying EV14 tonight with the PC12 so will let you know if any further issues.

all the best,

Geoff

 
Reply
#5
AS 2 Tom Little Wrote:Hello Geoff,

All fixed! http://air-source.us/Operations/logbook ... tid=376899

Also I made a slight change on the PIREP page, let's make sure that it works now..

Hi Tom,

whatever you did worked - flew another flight with the PC12 and it was recorded as such. Thanks again!

Geoff

 
Reply
#6
Great glad to hear it's working now!

 
Reply
  


Forum Jump:


Browsing: 1 Guest(s)